Test and Measurement Archives

Industrial thermal imager by Fluke uses infrared technology for speed
January 22, 2020 by Chevrier Instruments Inc.

Chevrier Instruments Inc. partners with many manufacturers to make the best measurement devices available to Canadian businesses. One of these manufacturers is Fluke, which recently introduced the TiS20+ industrial thermal imager. This tool…

Teledyne digital flow controllers offer quick and accurate performance
January 22, 2020 by Durham Instruments

Teledyne Hastings Instruments manufactures the Digital 300 Vue Series of thermal mass flow meters and controllers, built to measure mass flow accurately without corrections or compensations for gas pressure and temperature. Available from…

Liquiphant FTL51B by Endress+Hauser brings point-level detectors up a notch
January 20, 2020 by Endress + Hauser Canada Ltd.

Endress+Hauser Canada Ltd. has welcomed a new member to its Liquiphant family of point-level detectors: the FTL51B. This device is available in a wide spectrum of variants designed to comply with Industry 4.0.…

Digital torque transducer by HBM offers precision and reproducibility
January 15, 2020 by Durham Instruments

Durham Instruments is Canada’s go-to source for solutions by HBM Test and Measurement. For example, the T40B digital torque transducer offers digital torque measurement with nominal (rated) torques from 50 to 10,000 newton…

Endress+Hauser’s dedication to quality is evident through ISO certifications
January 13, 2020 by Endress + Hauser Canada Ltd.

For one of the country’s best lineups of quality measurement instrumentation, businesses know they can put their trust in Endress+Hauser Canada Ltd. The manufacturer is fully committed to creating industrial test and measurement…

Camille Bauer temperature transmitters and alarms get the job done
January 8, 2020 by Mod-Tronic Instruments Ltd.

Mod-Tronic Instruments Ltd. is a proud source of industrial solutions by Camille Bauer Metrawatt AG, a major manufacturer of test and measurement devices for more than three-quarters of a century. Camille Bauer’s impressive…

POSITAL has developed the smallest multi-turn absolute kit encoder
January 8, 2020 by Posital-Fraba

Technological innovation never stops at POSITAL-Fraba. The company has unveiled a fully functional prototype of its new miniature multi-turn absolute kit encoder for integrated motor feedback. This device is 23 millimetres high and…

Badger Meter’s industrial flow meter is ideal for corrosive and abrasive fluids
January 7, 2020 by Durham Instruments

Badger Meter manufactures many measurement devices that are available to Canadian businesses through Durham Instruments. One example is the Model 1100 industrial turbine flow meter. This instrument is designed to withstand the challenges…

Differential pressure switch by Barksdale now has an IO-Link option
January 6, 2020 by Wainbee Limited

Wainbee Limited is Canada’s top source for innovative solutions for manufacturers – products that break new ground in their respective fields. One of Wainbee’s partners, Barksdale Control Products, has upgraded its unique BDS3000…

Customers worldwide trust Endress+Hauser as a partner for measurement
December 31, 2019 by Endress + Hauser Canada Ltd.

Endress+Hauser Canada Ltd. is observing its 30th anniversary in 2020: three decades of supplying top test and measurement solutions to Canadian businesses. But this is one branch of a large entity that serves…

QuantumX universal DAQ system by HBM: the perfect testing solution
December 30, 2019 by Durham Instruments

Durham Instruments is a valuable distribution partner with HBM Test and Measurement, which manufactures many innovative measuring solutions. For example, the QuantumX data acquisition (DAQ) system is the ideal tool for all test…

Sauermann indoor air monitors are now available from Chevrier
December 20, 2019 by Chevrier Instruments Inc.

Test and measurement instrumentation has been the name of the game at Chevrier Instruments for nearly 45 years. The Montreal-based distributor has a wealthy selection of products from top manufacturers, and the inventory…

Endress+Hauser chlorine sensor offers fast, stable, precise measurement
December 19, 2019 by Endress + Hauser Canada Ltd.

An unmatched range of test and measurement instrumentation is available from Endress+Hauser Canada Ltd., including the Memosens brand of sensors. The company’s latest development is the new Memosens CCS51D chlorine sensor. Ideal for…

AR1000 laser distance meter by Acuity promises accuracy, long range
December 18, 2019 by Durham Instruments

Acuity Laser Measurement is renowned for its industrial measuring sensors, available in Canada via Durham Instruments. The AR1000 laser distance meter is the perfect pick for several applications, like crane and hoist tasks,…

How NDC’s InfraLab moisture analyzer benefits users in food processing
December 17, 2019 by Firing Industries Ltd

NDC Technologies manufactures some of the world’s most powerful and innovative process instrumentation, which is available in Canada through Firing Industries. Among NDC’s products are devices that measure moisture, fat, and other characteristics…

Industrial frame sensors by Dietz are available from IBIS Electro-Products
December 13, 2019 by IBIS Electro-Products Corp.

IBIS Electro-Products Corp. is the source that Canadian businesses turn to for innovative sensing tools manufactured by Dietz Sensortechnik. A popular line of Dietz products is its industrial frame sensors. These photoelectric sensors…

Choose products easily through Endress+Hauser’s E-direct online shop
December 12, 2019 by Endress + Hauser Canada Ltd.

Endress+Hauser Canada Ltd. offers a wide selection of test and measurement instrumentation to businesses in this country. And in the digital age, convenience is a must when it comes to buying industrial products.…

Brüel & Kjӕr’s triaxial accelerometer covers many different test areas
December 11, 2019 by Durham Instruments

Durham Instruments supplies the Type 4535-B-001 general-purpose triaxial CCLD accelerometer by Brüel & Kjӕr. This triaxial accelerometer comes with a Transducer Electronic Datasheet (TEDS) and makes testing simpler – by covering most of…

Mod-Tronic carries signal isolators and conditioners by Camille Bauer
December 9, 2019 by Mod-Tronic Instruments Ltd.

Camille Bauer Metrawatt AG has excelled in measurement instrumentation and power-system monitoring for more than 75 years. Mod-Tronic Instruments Ltd. is proud to make Camille Bauer products available in Canada – including the…

Endress+Hauser technology helps manufacturer to keep its pH sensors calibrated
December 5, 2019 by Endress + Hauser Canada Ltd.

Canadian businesses benefit from test and measurement instrumentation developed by Endress+Hauser Canada Ltd. But this corporation has been logging customer success stories around the world for many years. A prime example is its…

Standalone recorder by Brüel & Kjӕr measures noise, vibration, harshness
December 4, 2019 by Durham Instruments

Brüel & Kjӕr offers many innovative solutions in Canada through Durham Instruments, including general-purpose sound and vibration analyzers. For example, the company’s LAN-XI Notar standalone recorder is a tough device that captures time…

NDC Technologies offers processing solutions for a variety of industries
December 4, 2019 by Firing Industries Ltd

For a wide range of process measurement and control instrumentation, businesses know they can rely on the name NDC Technologies. Available in Canada through Firing Industries, the company’s products measure important characteristics of…

RMF contamination monitoring sensor can be mounted directly to systems
December 3, 2019 by Wainbee Limited

For solutions that offer high-viscosity filtration, the name to trust is Wainbee Filtration, a division of Wainbee Limited. The distributor offers great conditioning and monitoring solutions by RMF Systems, a Des-Case brand. A…

Instrument calibration is one of many reasons to trust Chevrier
November 29, 2019 by Chevrier Instruments Inc.

Chevrier Instruments Inc. has earned a solid reputation over the past 44 years for its selection of innovative measurement and control devices for industrial use. But this Montreal distributor offers services as well…

Turbidity sensor by Endress+Hauser offers constant water monitoring
November 28, 2019 by Endress + Hauser Canada Ltd.

Endress+Hauser Canada Ltd. never stops developing great measurement instrumentation for the industrial market in this country. Two of the latest examples are the CUS52D smart turbidity sensor and the CUA252 flow cell. These…

SMT’s MONI LOG compact logger monitors shock in large-scale transport
November 27, 2019 by Durham Instruments

Durham Instruments partners with SMT Elektronik to deliver outstanding monitoring devices. One example is the MONI LOG EnDaL smart compact logger. This is a universal data logger that monitors sensitive goods on a…

Endress+Hauser will showcase its Industry 4.0 solutions at SPS show
November 21, 2019 by Endress + Hauser Canada Ltd.

From November 26 to 28, Endress+Hauser will be exhibiting at the 30th annual SPS (smart production solutions) trade fair in Nuremberg, Germany. SPS is a major international event in the digital-automation industry, focusing…

Brüel & Kjӕr acoustical arrays are usable indoors or outdoors
November 18, 2019 by Durham Instruments

Danish manufacturer Brüel & Kjӕr makes world-leading measurement devices available through Durham Instruments. The lineup includes acoustical arrays, which rapidly produce detailed noise maps of different types of noise sources. The supplier offers…

Thermo-Kinetics now distributes RKC Instrument’s product line in Western Canada
November 8, 2019 by Thermo-Kinetics Measurement & Control Ltd.

Many businesses rely on measurement instrumentation from Thermo-Kinetics Measurement and Control. This company collaborates with many major manufacturers – and now, it is proud to announce that Thermo-Kinetics is a distributor for RKC…

For more than 65 years, Endress+Hauser has provided top solutions
November 5, 2019 by Endress + Hauser Canada Ltd.

Endress+Hauser Canada Ltd. is the Canadian branch of one of the largest instrumentation suppliers worldwide. This corporation has grown for well over six decades, from a small local business to the international prominence…

Test and Measurement News

Industrial thermal imager by Fluke uses infrared technology for speed January 22, 2020 by Chevrier Instruments Inc.

Teledyne digital flow controllers offer quick and accurate performance January 22, 2020 by Durham Instruments

Liquiphant FTL51B by Endress+Hauser brings point-level detectors up a notch January 20, 2020 by Endress + Hauser Canada Ltd.

Digital torque transducer by HBM offers precision and reproducibility January 15, 2020 by Durham Instruments

Endress+Hauser’s dedication to quality is evident through ISO certifications January 13, 2020 by Endress + Hauser Canada Ltd.

Camille Bauer temperature transmitters and alarms get the job done January 8, 2020 by Mod-Tronic Instruments Ltd.

POSITAL has developed the smallest multi-turn absolute kit encoder January 8, 2020 by Posital-Fraba

Badger Meter’s industrial flow meter is ideal for corrosive and abrasive fluids January 7, 2020 by Durham Instruments

Differential pressure switch by Barksdale now has an IO-Link option January 6, 2020 by Wainbee Limited

Customers worldwide trust Endress+Hauser as a partner for measurement December 31, 2019 by Endress + Hauser Canada Ltd.

QuantumX universal DAQ system by HBM: the perfect testing solution December 30, 2019 by Durham Instruments

Sauermann indoor air monitors are now available from Chevrier December 20, 2019 by Chevrier Instruments Inc.

Endress+Hauser chlorine sensor offers fast, stable, precise measurement December 19, 2019 by Endress + Hauser Canada Ltd.

AR1000 laser distance meter by Acuity promises accuracy, long range December 18, 2019 by Durham Instruments

How NDC’s InfraLab moisture analyzer benefits users in food processing December 17, 2019 by Firing Industries Ltd

Industrial frame sensors by Dietz are available from IBIS Electro-Products December 13, 2019 by IBIS Electro-Products Corp.

Choose products easily through Endress+Hauser’s E-direct online shop December 12, 2019 by Endress + Hauser Canada Ltd.

Brüel & Kjӕr’s triaxial accelerometer covers many different test areas December 11, 2019 by Durham Instruments

Mod-Tronic carries signal isolators and conditioners by Camille Bauer December 9, 2019 by Mod-Tronic Instruments Ltd.

Endress+Hauser technology helps manufacturer to keep its pH sensors calibrated December 5, 2019 by Endress + Hauser Canada Ltd.

Standalone recorder by Brüel & Kjӕr measures noise, vibration, harshness December 4, 2019 by Durham Instruments

NDC Technologies offers processing solutions for a variety of industries December 4, 2019 by Firing Industries Ltd

RMF contamination monitoring sensor can be mounted directly to systems December 3, 2019 by Wainbee Limited

Instrument calibration is one of many reasons to trust Chevrier November 29, 2019 by Chevrier Instruments Inc.

Turbidity sensor by Endress+Hauser offers constant water monitoring November 28, 2019 by Endress + Hauser Canada Ltd.

SMT’s MONI LOG compact logger monitors shock in large-scale transport November 27, 2019 by Durham Instruments

Endress+Hauser will showcase its Industry 4.0 solutions at SPS show November 21, 2019 by Endress + Hauser Canada Ltd.

Brüel & Kjӕr acoustical arrays are usable indoors or outdoors November 18, 2019 by Durham Instruments

Thermo-Kinetics now distributes RKC Instrument’s product line in Western Canada November 8, 2019 by Thermo-Kinetics Measurement & Control Ltd.

For more than 65 years, Endress+Hauser has provided top solutions November 5, 2019 by Endress + Hauser Canada Ltd.