REDWIRE Manufacturing News

News you can use from leading suppliers

Harting launches major expansion of cable assemblies
March 20, 2015 by Harting Canada Inc

Harting has unveiled a major expansion of its M8, M12 and ⅞-inch overmoulded cable assembly lineup for data and signal applications, providing customers with the convenience of one-stop shopping for reliable, robust connectivity. …

Customer satisfaction top priority at Bohne Spring
March 16, 2015 by Bohne Spring Industries Ltd.

Bohne Spring’s goal is to make running your business as easy as possible. They do this by providing customers in a wide variety of market sectors, including the automotive, aerospace, defense, consumer goods…

Employee-owned machine shop has reputation for quality
March 13, 2015 by L & M Precision Products Inc

Quality is not just a word for the folks at L & M Precision Products. It’s a culture.  The Toronto-based machine shop has a comprehensive Quality Assurance Program that utilizes Lean manufacturing processes…

Keep it clean: An intro to parts washers
March 12, 2015 by Vibra Finish Limited

Parts cleaning is an essential step in manufacturing, remanufacturing and maintenance processes. To clean effectively, a parts washer is needed — a piece of equipment designed to clean, degrease and dry bulk loads…

Glass manufacturer cuts out waste
March 11, 2015 by Pegasus Glass

Pegasus Glass has a goal of zero waste. The Cambridge, Ont.-based glass manufacturer created its “ZerOwaste project” with the intent to recycle or reuse virtually everything it produces or consumes — eliminating 95…

State-of-the-art machinery brings enhanced capability
March 11, 2015 by L & M Precision Products Inc

L & M Precision Products Inc., an ISO 9001 registered company celebrating more than 50 years in business, is continually focused on upgrading its first and secondary operation machines. When older or inefficient…

The truth about calibration and accreditation
March 10, 2015 by Digital Measurement Metrology Inc (DMM)

There is a myth about calibration — that it’s not necessary. But that couldn’t be further from the truth. Everything that is manufactured must be measured to ensure quality.  Calibration is responsible for…

Butterfly valves offer unparalleled reliability
March 9, 2015 by IPEX Management Inc.

IPEX Inc.’s highly versatile butterfly valves, part of the company’s line of thermoplastic valves, can be used for simple on/off service, but also for processes requiring precise throttling. End-of-line installation of a lugged version…

Broaching machine manufacturer meets customer needs — from design to training and beyond
March 9, 2015 by The Ohio Broach & Machine Co.

Ohio Broach & Machine Company has more than 55 years of experience in engineering broaching machines and tooling. The Willoughby, Ohio-based company can design and build standalone or transfer type machines with manual, semi-automatic or automatic…

ProLogix offers complete control of Hytrol sortation equipment
March 9, 2015 by Norpak Handling Limited

Hytrol is just one of a growing list of high-quality international suppliers represented across Canada by Norpak Handling and McKessock Conveyor Solutions. The ProLogix Sortation Control package is available from the companies to…

Optical strain gauge offers many benefits
March 6, 2015 by Durham Instruments

HBM's measurement technology enables the best of both worlds — the simultaneous acquisition of data using both electrical and optical strain gauges. The EasyOptics module in HBM's catmanAP software enables users to jointly…

Vibropeening technology produces stronger surfaces
March 6, 2015 by Vibra Finish Limited

The future goal of metallurgy is to alter the mechanical properties of metals to produce lighter, stronger, break- and failure-resistant parts. Traditionally, this has been done with nitriding, shot peening and heat-treating methods. But Vibra…

Manufacturer uses state-of-the-art equipment to produce custom bushings
March 6, 2015 by Collison-Goll Ltd

Collison-Goll has a vision — to be the premier precision machined products manufacturer in North America. The Toronto-based company manufactures, among other things, custom brass, bronze and copper bushings for a variety of industrial applications. …

FEIN’s metal cutting saws pack power and performance
March 5, 2015 by Fein Power Tool Company

FEIN Power Tools’ Slugger Metal Cutting Saws — available in three sizes — are high-performance, durable solutions for metal cutting.  The new 7¼-inch saw features a powerful, double-insulated 1,400-watt (12-amp) motor for continuous loads.…

McKessock and Norpak make powerful conveyor solutions team
March 5, 2015 by Norpak Handling Limited

In 2010, McKessock Engineering joined Norpak Handling Limited and Norpak (BC) Limited as part of the Northumberland Group of companies. It was an easy transition for the McKessock team. All of the companies in the…

Harting’s new Han Ex connector sets made for explosion-proof environments
March 5, 2015 by Harting Canada Inc

Harting has launched the Han Ex industrial connector portfolio for explosion-proof applications. The series of five size 3A sets are each comprised of a hood, housing and high pin count insert. The connectors…

Powerful cordless cutter ideal for onsite metalworkers
March 4, 2015 by Walter Surface Technologies

Metalworkers are often on-location without access to a power supply. Now Quebec-based Walter Surface Technologies has the solution — the Zipwheel cutter, a powerful cordless cutter that can drive a six-inch cutting wheel.…

The secret to Bohne Spring’s success
March 2, 2015 by Bohne Spring Industries Ltd.

Bohne Spring strives to be the leading manufacturer of quality precision springs, wire forms and metal stampings. The third-generation family-owned business has established a solid reputation since its founding in 1941 through continuous…

New valves from Festo offer two-way convertibility
March 2, 2015 by Festo Inc

Festo’s new VSNC series of standard solenoid NAMUR valves is two valves in one. It converts easily and quickly from a 5/2-way valve into a 3/2-way valve by simply turning its seal 180…

Reduce downtime with high-quality diaphragm pumps
February 25, 2015 by York Fluid Controls Ltd

York Fluid Controls supplies diaphragm pumps that provide unparalleled reliability and performance. For 55 years, the Brampton, Ont.-based company has been distributing high-quality pumps designed to reduce downtime and minimize maintenance requirements —…

Space solutions to suit any industry
February 25, 2015 by Excess Space Solutions Inc

Excess Space Solutions (ESS) is a thriving full-service manufacturer and distributor of space solution products, with clients ranging from corporate national chains to local independent businesses. If space is an issue — regardless…

Portable structures offer peace and quiet for busy plants
February 25, 2015 by Canadian Portable Structures (1992) Ltd.

Canadian Portable Structures (CPS) wants to create an ideal working environment for its customers that will improve morale and communication.   “When space is organized, the result is increased productivity without annoyances, interruptions…

Harting sees double-digit revenue growth in Canada
February 25, 2015 by Harting Canada Inc

Harting Canada continues to experience double-digit annual revenue growth, a trend which shows no sign of abating, according to Jon DeSouza, president and CEO of Harting Canada and Harting North America.  The outlook…

Lineup of industrial lubricants keeps machine tools running smoothly
February 24, 2015 by Rotem Industrial Products Inc

Industrial lubricants help minimize corrosion, maximize oil life and ensure that processes run smoothly. Rotem Industrial Products carries a lineup of industrial lubricants designed for a variety of applications — from industrial bearings…

Fabricator makes custom process equipment in massive facility
February 24, 2015 by Alps Welding Ltd

Alps Welding has produced thousands of custom pressure vessels to meet its customers’ diverse needs since it was founded in 1974. Within the last seven years, with its investment in a state-of-the-art 55,000-square-foot fabrication facility…

Save time and money with this essential tool
February 24, 2015 by Advance Fasteners Ltd

Electronic hardware standoffs are essential for ensuring that products work effectively and efficiently. By keeping the proper amount of space between components, standoffs help prevent malfunctions that cost time and money.  “From preventing…

Steerable transfer cart handles dies with ease
February 24, 2015 by Engineered Lifting Systems & Equipment Inc.

When a customer required die handling for an automotive metal stamping application, Engineered Lifting Systems had the solution — a steerable transfer cart.  The challenge: The customer had been using an overhead crane,…

Three must-have features for belt grinding machines
February 20, 2015 by Fein Power Tool Company

FEIN's new, powerful, handheld belt grinding machines — GHB 15-50 and GHB 15-50 Inox — are designed for flexible on-site grinding and finishing applications for a variety of industries.  The tools feature the…

Five reasons to consider Minco temperature sensors
February 20, 2015 by Mod-Tronic Instruments Ltd.

No sensor manufacturer offers more styles and variations of temperature sensors than Minco. Here’s five reasons to consider making the company’s sensors part of your application: 1. Single source manufacturing: Minco builds sensors…

Disc springs meet quality standards
February 19, 2015 by Daemar Inc.

Daemar offers a complete range of standard disc spring products as per DIN 2093 and DIN 6796 — two German standards considered benchmarks for quality of disc springs and belleville washers worldwide. There…


Subscribe
Free REDWIRE e-newsletter Post your own REDWIRE news