REDWIRE Facilities Maintenance News

News you can use from leading suppliers

Software takes data-driven manufacturing to a new level at Mazak
December 13, 2014 by Memex Automation Inc.

Mazak is always exploring manufacturing processes and continuous improvement methodologies that can be implemented in its other manufacturing plants to improve productivity and efficiency. The team at Mazak understands that in order to…

EXAIR’s reversible drum vacs are now CE compliant
December 9, 2014 by Exair LLC

After undergoing rigorous testing by an independent laboratory, EXAIR’s reversible drum vacs have been proven to meet the stringent requirements of the European Union in order to be marked as CE compliant. The…

How to extend the life of your bearings
December 5, 2014 by Daemar Inc.

Premature bearing failure is a real problem. Bearings are at risk whenever seals allow lubricant leakage or contaminant intrusion into the housing. Until now, there has been no comprehensive solution — only partial…

Good vibrations: One way to avoid machine downtime
November 28, 2014 by Dalimar Instruments Inc

In a manufacturing plant, it is very important that the machines on the production floor are well maintained and monitored to avoid downtime. Measuring the vibration of machinery is one way to avoid costly…

Six steps to selecting the right service partner
November 28, 2014 by Untitled

Time is money. So if you have a machine down and production stops, quick action is of the essence. Every wasted second is wasted dollars. Are you prepared?  You are if you’ve selected…

How to diagnose a leaking steam trap
November 27, 2014 by Keystone Steam Supplies

Steam traps have a tendency to leak. A faulty steam trap not only wastes valuable heating dollars, but it can also destroy condensate pumps, create hot and cold spots within a heating space,…

Everything you need to know about ultrasonic steam trap leak detection
November 27, 2014 by Keystone Steam Supplies

A faulty steam trap can waste valuable heating dollars, destroy condensate pumps, create hot and cold spots within a heating space, cause production inefficiency, produce destructive water hammer, and lead to premature failure…

Core drilling, Part 2: Questions you need answered
November 27, 2014 by Fein Power Tool Company

When precise drilling of holes is required in metalwork pieces, a core drilling system may be the answer.  Fein Power Tool Company has compiled a list of frequently asked questions related to core…

Three important qualities to look for in a supplier
November 27, 2014 by Bohne Spring Industries Ltd.

The three most important qualities you should look for in your mechanical spring supplier — or any supplier for that matter — are quality, service and dependability.  Bohne Spring says it has this…

Core drilling, Part 1: Questions you need answered
November 26, 2014 by Fein Power Tool Company

When precise drilling of holes is required in metalwork pieces, a core drilling system may be the answer. And if it is the answer, you likely have even more questions about how to…

Nine benefits of pulsation dampeners and surge suppressors
November 26, 2014 by York Fluid Controls Ltd

Positive Displacement (PD) pumps create pulsation and hydraulic shock due to the reciprocating nature of their stroking action, potentially damaging the entire pumping system. A good pulsation dampener and surge suppressor should remove…

Industrial fluids: Find the best solution for your application
November 26, 2014 by Rotem Industrial Products Inc

Industrial fluids are integral to any manufacturing process. Cutting fluids, hydraulic fluids, coolants, cleaners, lubricants and metalworking fluids play a big role in your operations — and there are a lot of options…

Three benefits of the redesigned Fein MultiMaster power tool
November 25, 2014 by Fein Power Tool Company

The Fein MultiMaster power tool has been redesigned for maximum performance and minimum vibration.  Three of its most impressive features include:  1. More powerful The FEIN MultiMaster FMM 350 Q saws up to 35…

Selecting the right material handling solution
November 25, 2014 by Avenue Industrial Supply Co. Ltd.

Having the right material handling solution decreases the chance of injuries, and ultimately leads to increased productivity for your company.  Scissor lifts and lift tables, for example, can help increase productivity on assembly…

Optical sensors “operate flawlessly” in recycling application
November 25, 2014 by Baumer Inc.

Returning, sorting and recycling packaging materials is a must as many companies push towards greener operations.  These materials often include used PET bottles and containers, as well as large quantities of cardboard packaging.…

Understanding pipe stiffness: PVC versus ductile iron
November 24, 2014 by IPEX Management Inc.

Pipe stiffness is the measure of a flexible pipe’s resistance to deflection under load. A flexible pipe is any pipe that can deflect two per cent without suffering damage. Both ductile iron (DI) and…

Gas filling achieves new highs for productivity and accuracy thanks to valves
November 24, 2014 by CPV Manufacturing

At the Norco gas filling plant in Boise, Idaho, gas filling has taken on a whole new meaning.  The 53,000-sq.-ft. plant houses an automated gas fill system by Weldcoa, and a 1,250-sq.-ft. research…

Sensor helps prevent low-temperature damage
November 21, 2014 by Mod-Tronic Instruments Ltd.

A new low-temperature cut-out and averaging sensor helps prevent low-temperature damage in industrial environments.  The solid-state Chill-Out sensor, from Minco and available through Mod-Tronic Instruments, senses freezing temperatures within any 12-inch section along…

Common causes of O-ring failure — and what to do about it: Part 2
November 21, 2014 by Daemar Inc.

We recently highlighted three common causes of O-ring failure. But there are more.  This article highlights three more frequent causes of failure.  1. Explosive decompression results when, after a period of service under…

Common causes of O-ring failure — and what to do about it: Part 1
November 21, 2014 by Daemar Inc.

Like any device subject to judgment in design or human error during installation, O-ring seals can fail.  While there are a number of different types and causes of seal failure, this article highlights…

Should you replace thermocouples with resistance temperature detectors?
November 21, 2014 by Thermo-Kinetics Measurement & Control Ltd.

Resistance temperature detectors (RTDs) — sensors used to measure temperature by associating the resistance of the RTD element with temperature — are slowly replacing thermocouples in many industrial applications below 600 degrees C. Why? RTDs have…

Five benefits of fibreglass dock-level storage systems
November 21, 2014 by Excess Space Solutions Inc

Flexibility is a must in today’s ever-changing industrial environment. When a company needs to expand, but doesn’t have the space in its facility, fibreglass storage systems may be the answer.  Below are five…

Three ways to keep your conveyor clean
November 20, 2014 by Associated Industrial Brush Co. Ltd.

Many industrial environments rely on conveyors to efficiently move materials from one location to another. If the systems aren’t properly maintained, though, the result is often downtime. And just like that, the company…

Choosing the right chain for your application
November 20, 2014 by Tsubaki Of Canada Ltd.

With so many different industries and environments, how do you know what the right chain for any given application is? There is not always one correct answer, but many factors can play into…

Condition monitoring keeps machinery running at top performance
November 19, 2014 by Wainbee Limited

Condition monitoring is a major component of preventative maintenance. It helps determine the condition of machinery during operation, and identifies significant changes, which could be indicative of a developing fault.  Parker Kittiwake specializes in online…

Fastener distributor revamps website
November 19, 2014 by Advance Fasteners Ltd

Advance Fasteners, a Mississauga, Ont.-based fastener distributor, has updated its website to provide visitors with a comprehensive range of industrial fasteners and supplies online. The site features hundreds of product lines and tens of thousands…

Top seven reasons to use a filter/regulator with every air-operated double-diaphragm pump
November 18, 2014 by York Fluid Controls Ltd

An air filter/regulator is probably the most important investment you can make to extend the life of your air-operated double-diaphragm (AODD) pump, and optimize performance. That’s according to Justin Dill, product manager with…

Father-son business helps metalworkers find reliable measurement solutions
November 18, 2014 by Rotem Industrial Products Inc

Precision machining cannot have its name without accurate measuring instruments and industrial gauging equipment.  Toronto-based Rotem Industrial Products is a father-and-son business, headed by Art Larman and his son, Paul, that delivers high-quality…

A 12-step guide to the safe operation and maintenance of cantilever racking
November 18, 2014 by Econo-Rack Storage Equipment

When using cantilever racks in your facility to store large or awkward items, there are a number of factors that need to considered to ensure the safe operation and continued maintenance of the…

Manufacturer increases tool life 50 per cent with cold gun
November 18, 2014 by Exair LLC

Dave Gray had a frequent problem when working on an Okuma vertical machining centre at Positech Corporation’s Fairfield, Ohio, facility, which manufactures intricate machined parts for the automotive, motorcycle and aerospace industries. Whenever…



Subscribe
Free REDWIRE e-newsletter
Post your own REDWIRE news