REDWIRE Environment and Safety News

News you can use from leading suppliers

Air foot switches by Linemaster always protect critical electrical components
September 15, 2021 by Linemaster Switch Corp.

Linemaster Switch Corporation is a leading manufacturer of industrial foot switches, including three models of air foot switches. These units protect critical electrical components in any environment, wet or dry, and a key…

The full Lovato Electric product portfolio is available through PIC
September 3, 2021 by Process Instruments and Components Inc

Process Instruments and Components Inc. (PIC) is a top distributor in Canada for industrial solutions for hazardous work areas. With a unique lineup that includes products by Pepperl+Fuchs, Carlo Gavazzi, ODE, and DuraTime,…

Bore-Wrap by Denso protects pipe in Kitchener, Ont. drilling project
September 3, 2021 by Denso North America Inc

Denso North America makes sealing and protection solutions that are used widely in infrastructure projects. Earlier this year, Kitchener Utilities in Kitchener, Ont. needed to install about 210 metres of a new yellow…

Linemaster Classic foot switches blend traditional look with new technology
August 10, 2021 by Linemaster Switch Corp.

Industrial foot switches are the specialty of Linemaster Switch Corporation, with a wide portfolio of models. This includes three types of Classic foot switches – the Classic II, Classic IV, and Classic IV…

MOCAP backs up its high quality standards with official certification
August 3, 2021 by MOCAP, LLC

Plugs, caps, grips, and other essential industrial products: MOCAP is a premier source of high-quality protective solutions in North America. This company pushes itself to maintain high standards by keeping up with relevant…

shipping equipment

Seven reasons to trust Advance Shipping Supplies for shipping equipment
July 5, 2021 by Advance Shipping Supplies Inc

Advance Shipping Supplies Inc. has been a key Canadian supplier of industrial packaging and shipping equipment for more than 35 years. Decades of success have not only broadened the company’s reputation far and…

dump station

N.R. Murphy dump station solutions can offer maximum dust control
June 17, 2021 by N.R. Murphy Limited

For close to 80 years, N.R. Murphy Limited has been a top producer and distributor of industrial air-quality solutions. Although the company is renowned mostly for its dust collectors, it offers a diverse,…

rust-removal service

Vibra Finish Limited Rust-Removal Service Is Essential During the Summer
May 11, 2021 by Vibra Finish Limited

Vibra Finish Limited offers a rust-removal service that is always available. Surface rust is an unwelcome phenomenon during the humid days of summer. Whether the parts are manufactured locally, or rusted during a sea…

hydrostatic level probe

Hydrostatic level probe by Endress+Hauser is easy to install, maintain
April 23, 2021 by Endress + Hauser Canada Ltd.

Endress+Hauser Canada Ltd. never ceases in its efforts to come up with new, more innovative test and measurement instrumentation – like the Waterpilot FMX11 hydrostatic level probe. This unique device is the probe…

Hannover Messe 2021

Hannover Messe 2021 will include presentations by Festo, April 12-16
March 26, 2021 by Festo Inc

Festo Canada continues to make connections in trade events worldwide, even during lockdown. This year, Hannover Messe 2021 is going to be a virtual event again – and Festo will be onsite with…

L. & M. Precision Products’ expertise includes lead-free brass machining
March 24, 2021 by L & M Precision Products Inc

As a leading manufacturer of custom precision-machined components, L. & M. Precision Products uses a variety of materials. These include stainless steel, aluminum, copper alloys, titanium, and plastics. Another major material the company uses is…

shipping solutions

Advance Shipping Supplies is the place for packaging, shipping solutions
March 22, 2021 by Advance Shipping Supplies Inc

For more than 35 years, Canadian businesses have relied on Advance Shipping Supplies Inc. for the best in packaging and shipping solutions. The company’s experienced team of experts helps customers to determine the…

safety guidelines

Safety guidelines and ethical responsibilities remain a high priority at L. & M.
February 24, 2021 by L & M Precision Products Inc

L. & M. Precision Products Inc. is not only a top supplier of quality custom metal parts; it also continues to uphold its corporate responsibilities. As an essential supplier, L. & M. remains…

rust removal services

Vibra Finish’s Rust Removal Services Boost Efficiency in Metal Components
February 16, 2021 by Vibra Finish Limited

Businesses rely on Vibra Finish for a variety of processes, from vibratory finishing to burnishing and deburring.  Among the company’s most popular services is rust removal, or derusting. Metal parts can be prone to…

particulate measuring devices

Particulate measuring devices by Auburn FilterSense offer high accuracy
February 10, 2021 by Firing Industries Ltd

Firing Industries Ltd. is renowned in Canadian industry for its broad lineup of processing solutions, but its portfolio also includes particulate measuring devices. These instruments come from Auburn FilterSense, which relies on more…

Environmental Management

An Environmental Management System keeps the CFS team responsible
January 25, 2021 by Custom Foam Systems Ltd.

Custom Foam Systems Ltd. (CFS) knows that businesses today have an obligation towards social responsibility. In the era of climate change, corporations must learn to do little or no harm to the natural…

particulate measurement devices

Auburn particulate measurement devices suit foundries in urban areas
December 3, 2020 by Firing Industries Ltd

Firing Industries Ltd. teams up with Auburn FilterSense to supply a broad variety of industrial equipment to Canadian businesses: solutions for triboelectric detection, reporting and data management, or predictive monitoring. For foundries located…

dry ice blasting equipment

Red-D-Arc uses dry ice blasting equipment for ceiling paint removal
October 22, 2020 by Red-D-Arc Welderentals

As a leading global manufacturer of welding solutions and more, Red-D-Arc Welderentals has chocked up more than its share of success stories over the years. And the number of satisfied customers keeps on…

gas booster

Haskel Q-Drive gas booster offers clean, quiet, and efficient compression
October 22, 2020 by Wainbee Limited

Efficient design is a common need for industrial equipment in many industries, and Wainbee Limited fulfills this need with many products. As the exclusive authorized distributor for Haskel in Canada, Wainbee carries the…

smart rotary encoders

Smart rotary encoders by POSITAL are upgraded for Industry 4.0
September 24, 2020 by FRABA Inc

POSITAL-Fraba has upgraded its IXARC line of smart rotary encoders to meet the challenges of Industry 4.0 – by expanding the series to include support for the IO-Link communications interface. With this expansion,…

induction heating solutions

Red-D-Arc induction heating solutions: advantages in storage-tank building
September 21, 2020 by Red-D-Arc Welderentals

Storage-tank fabrication involves two crucial welding processes that ensure final tank quality and durability: preheating and post-weld heat treatment. Preheating means heating material to a specific temperature before welding, while post-weld treatment is…

baghouse

Auburn FilterSense equipment is available in Canada from Firing Industries
September 9, 2020 by Firing Industries Ltd

Firing Industries brings a wide range of Auburn FilterSense equipment to the Canadian market, from particulate monitors to baghouse controls. Customers rely on this manufacturer for solutions for triboelectric detection, reporting and data…

acid waste systems

IPEX acid waste systems handle many chemicals and pH levels
September 9, 2020 by IPEX Management Inc.

Industrial piping systems are the specialty of IPEX, and the company’s inventory includes several brands of high-quality acid waste systems. These products are all designed to handle a broad range of chemicals and…

dry ice blasting solutions

Red-D-Arc dry ice blasting solutions work for the oil and gas industry
August 17, 2020 by Red-D-Arc Welderentals

While businesses all over the world trust Red-D-Arc Welderentals for its unsurpassed lineup of welding-related equipment, the manufacturer also provides various dry ice blasting solutions. The Red-D-Arc team equips these Cold Jet blasters…

foam solutions

CFS values health, safety, and environmental responsibility in operations
August 13, 2020 by Custom Foam Systems Ltd.

For the top supply of custom foam solutions and unmatched expertise in them, the only name one needs to know is Custom Foam Systems Ltd. (CFS). The company always excels in its mission…

double containment systems

IPEX double containment systems prevent leaks and other piping issues
July 21, 2020 by IPEX Management Inc.

Many working environments require fail-safe piping systems with no leaks or safety issues. IPEX offers piping solutions to fill this need – particularly double containment systems. The IPEX team understands the complexity of…

effluent monitoring

Endress+Hauser offers effluent monitoring with a redundant pH system
July 10, 2020 by Endress + Hauser Canada Ltd.

For decades, Endress+Hauser Canada Ltd. has kept businesses competitive with premier test and measurement instrumentation. One innovative solution that the company offers, particularly for the food-processing sector, is sustainability through effluent monitoring. With…

high-quality protective units

High-quality protective units: MOCAP backs its abilities up with certification
June 12, 2020 by MOCAP, LLC

MOCAP is a major North American source of high-quality protective units – plugs, caps, grips, and other essential industrial solutions. One way in which the company pushes itself to maintain its high standards…

rust removal service

Vibra Finish rust removal service is essential during the summer
June 10, 2020 by Vibra Finish Limited

Vibra Finish Ltd. offers a rust removal service that is always available. Surface rust is an unwelcome phenomenon during the humid days of summer. Whether the parts are manufactured locally, or rusted during…

engineering expertise

High quality and great service: these are two of Rosta’s priorities
May 21, 2020 by Rosta Inc

Mastery of rubber-suspension, oscillating, and tensioning technologies: this is why Rosta Inc. machine elements are trusted so widely among Canadian businesses. And this internationally renowned company continues to succeed for other reasons –…


Subscribe
Free REDWIRE e-newsletter Post your own REDWIRE news