Posted by John Brooks Company Limited
John Brooks Company Limited: Fluid Handling Solution providers since 1938. For over 80 years, John Brooks Company has pr... Read more
BETE manufactures the TurboMix Eductor nozzle.
BETE fluid-handling solutions are available from John Brooks Company Limited, like the TurboMix Eductor nozzle for clog-resistant agitation and mixing of liquids in tanks. This is an effective, economical way to circulate fluids in open or closed tanks, with no moving parts and minimal maintenance required.
The TurboMix Eductor is available in plastic or metal models and sprays with a cone-shaped plume, with an inherently clog-resistant design.
Multiplying effect on liquid flow
The initial liquid pumped into the system is blended with the tank contents within the nozzle before being sprayed back into the tank. The nozzle operation creates a multiplying effect on liquid flow, making the volume of discharge liquid three-to-five times greater than that of the motive fluid pumped. The flow rate ranges from 6.96 to 3,180 gallons per minute. The nozzle contains glass-filled polypropylene, brass, carbon steel, and 316 stainless steel, and it connects to numerous pipe sizes from 3/8 to eight. John Brooks Company recommends it for the following applications:
To learn more, contact John Brooks Company.
Posted by John Brooks Company Limited
John Brooks Company Limited: Fluid Handling Solution providers since 1938. For over 80 years, John Brooks Company has pr... Read more