SAMES KREMLIN recommends its Airmix spray tips for better finishes

Airmix spray tips by SAMES KREMLIN are useful with a wide range of spraying materials.

Since 1975, SAMES KREMLIN has revolutionized paint spray finishing with its Airmix technology, today’s global industry standard for medium-pressure atomization. For optimal Airmix performance, it is best to use specially designed Airmix spray tips – and users need to care for these tips properly to get top results.

These Airmix spray tips are constructed for use with SAMES KREMLIN’s Xcite manual guns, as well as its AVX and ATX automatic guns.

The longest possible lifespan

Recommended mainly for water-based and solvent-based paint, Airmix spray tips combine superior finish quality with efficient operation for high productivity. Built out of hard carbide, they offer a transfer efficiency of 86 per cent.

SAMES KREMLIN guarantees superiority over competing paint-spraying tips in three specific areas: performance, productivity, and sustainability. Specifics go as follows:

• Performance: Not only do these tips provide high transfer efficiency; they also offer optimal quality of spraying, with pressures starting from 725 pounds per square inch.
• Productivity: All of these tips have the same consistent pattern and flow, which ensures constant productivity during use.
• Sustainability: The carbide used to manufacture these tips is the hardest in the world, which guarantees the longest possible lifespan.

Airmix tips are useful with a wide range of spraying materials, including epoxy primer, polyurethane primer, bitumen, and water-based primers or UV materials. They also suit applications in a broad variety of markets and industries, including agriculture, construction, general manufacturing, transportation, the military, and wood processing.

Proper care of these spray tips is necessary to ensure the benefit of repeatability of the flow rate and fan pattern of the tips for maximum performance. For a few simple pointers on maintaining these tips, check out the video below:

Airmix is an intermediate, medium-pressure paint spraying technology that has been going strong for more than four decades. It combines high finishing quality with uniform film build, resulting in high productivity on paint flow rates from 400 to 2,000 cubic centimetres per minute. SAMES KREMLIN offers 18 Airmix products, including guns, tips, and paint pumps.

For more information, contact SAMES KREMLIN.

• Tweet