Mod-Tronic Instruments carries Loop power packs by Camille BauerOctober 28, 2020 REDWIRE is news you can use from leading suppliers. Powered by FRASERS.
Free REDWIRE e-newsletter
Camille Bauer makes a diverse range of test and measurement instrumentation, available in Canada via Mod-Tronic Instruments Ltd. – including the SINEAX B 812 series of Loop power packs. Equipped with signal outputs and HART communications, these power supplies are designed for intelligent and conventional two-wire transmitters, in P12/17 housing for rail mounting. Each unit provides the DC power supply for these transmitters and transfers the measured variable unchanged to the electrically insulated output.
Intrinsically safe versions available
All versions of the SINEAX B 812 are built for FSK1 communication and used in conjunction with transmitters capable of dialogue and operation according to the FSK principle and the HART or user-specific protocol. Intrinsically safe models are available, with intrinsically safe inputs; these versions operate in conjunction with intrinsically safe two-wire transmitters in hazardous areas with explosion risks.
These Loop power packs are suitable for monitoring the measurement/supply to detect short and open circuits; the red LED on each unit signals these faults. Each fulfills all of the important requirements and regulations regarding electromagnetic compatibility in the EMV and Safety standard (EN 61010). Camille Bauer has developed and manufactured this product in strict accordance with the ISO 9001 quality standard, and it has been certified according to the 94/9/EG guideline.
Other important features and benefits of these Loop power packs from Mod-Tronic:
- electrical and galvanic insulation between input, output, and power supply;
- universal AC/DC power supply;
- green power for LED; and
- compact and narrow design.
Technical specifications include a working voltage of 300 volts, testing voltage of 3.6 kilovolts, operating temperature from -20 to 50 degrees Celsius, storage temperature from -20 to 70 degrees Celsius, relative humidity of less than or equal to 75 per cent without condensation, terminal cross-section from 0.14 to 2½ square millimetres, and weight of approximately 100 grams. These power supplies can be used in any position, and plug-in terminals are coded to prevent incorrect connections.
Input for this unit is 4-20 mA, or 18 to 25½ VDC; output is 4-20 mA, or 17 VDC with no load.
To learn more, contact Mod-Tronic.