High temperature masking tape by MOCAP leaves no residue behind

MOCAP manufactures two types of high temperature masking tape.

Among MOCAP’s exceptional inventory of industrial protective products is its masking items, consisting of caps, plugs, discs, and tubing made of rubber or vinyl. This includes two different lines of high temperature masking tape – one made of polyester, and the other polyimide.

Both of these types of high temperature masking tape are ideal for protecting manufactured products in extremely hot environments. They are also easy to remove, with a silicone-based adhesive that leaves no residue behind after users take them off.

Orders ready for immediate shipment

Recommended for high-temperature powder coating applications, MOCAP’s MCT620 line of polyester masking tape can resist temperatures of up to 218 degrees Celsius for one hour. The company stocks this tape on wide rolls and is willing to cut it to any specific width requested by a client. Polyester tape is always ready for immediate shipment to customers and typically arrives between one and two business days.

MCT620 high temperature masking tape comes in 12 different sizes, with tape widths ranging from 6.4 to 152.4 millimetres (mm) and a consistent roll length of 65.8 metres (m). MOCAP also manufactures polyester discs, stocked in sized from 3/16 of an inch to 1¾ inches in diameter.

For temperatures slightly higher than 218 degrees Celsius, MOCAP recommends its MCT800 line of polyimide masking tape. This tape not only can withstand continuous temperatures of up to 260 degrees Celsius for an hour – it also can resist shorter exposures to temps above 370 degrees Celsius.

Like the polyester tape, this polyimide tape is ideal for high-temperature powder coating applications and similar tasks that involve extreme heat. It is also stocked on wide rolls and can be cut to custom widths for shipment in two business days or less.

MCT800 polyimide masking tape is available in 14 different sizes. Tape widths go from 4.8 to 152.4 mm, in a common roll length of 32.9 m. Polyimide masking discs are also available, in the same diameters as the polyester ones.

About the company

Since 1982, MOCAP has produced a variety of rubber, plastic, and vinyl protective products.

For more information, contact MOCAP.

• Tweet