REDWIRE High-temperature masking tape by MOCAP comes in polyester and polyimide

January 31, 2022 REDWIRE is news you can use from leading suppliers. Powered by FRASERS.

Posted by MOCAP, LLC


MOCAP is the Industry Leader in the manufacturing of quality Dip Molded, Injection Molded and Extruded Plastic & Rub... Read more

Contact supplier


Subscribe
Free REDWIRE e-newsletter

MOCAP carries two models of high-temperature masking tape in its lineup.

MOCAP serves businesses across the continent with its unmatched lineup of protective products, including such masking items as caps, plugs, discs, and tubing made of vinyl or rubber. One popular example: the company makes two series of industrial high-temperature masking tape, one of them in polyester and the other in polyimide. These tapes are ideal for protecting manufactured products in extremely hot environments. With a silicone-based adhesive that leaves no residue behind, they are also simple to remove.

Different tape sizes available

There are two lines of high-temperature masking tape available from MOCAP: the MCT620 series of polyester tape, and the MCT800 series of polyimide tape. Both of these tapes are recommended for extremely hot powder-coating tasks.

The MCT620 model can resist temperatures of up to 218 degrees Celsius for one hour. The MOCAP crew stocks this tape on wide rolls and can cut it to any specific width that a client wants. Twelve sizes are available, with widths that range from 6.4 to 152.4 millimetres (mm) and a consistent roll length of 65.8 metres (m). MCT620 polyester tape is always stocked for immediate shipment upon order, and it usually arrives within one or two business days. Also available are polyester discs, which are stocked in sized from 3/16 of an inch to 1¾ inches in diameter.

The MCT800 line of tape is recommended more for applications involving higher temperatures. Made out of polyimide, this masking tape can withstand temperatures as high as 260 degrees Celsius over an hour, as well as shorter exposures to temperatures that are higher than 370 degrees Celsius.

MOCAP recommends the MCT800 series for high-temperature powder-coating applications and other scenarios with extreme heat. The company stocks this tape on wide rolls and is willing to cut it to custom widths for shipment in two business days or less. This polyimide masking tape is available in 14 sizes, with widths that run from 4.8 to 152.4 mm in a common roll length of 32.9 m. MOCAP also sells polyimide masking discs, available in the same diameters as the polyester discs.

For more information, contact MOCAP.


Share

Posted by MOCAP, LLC


MOCAP is the Industry Leader in the manufacturing of quality Dip Molded, Injection Molded and Extruded Plastic & Rub... Read more

Contact supplier