REDWIRE Bergen Cable and preformed wire-rope solutions: the five key advantages

March 9, 2020 REDWIRE is news you can use from leading suppliers. Powered by FRASERS.

Posted by Bergen Cable Technology, Inc


Mfr Mechanical Cable, Cable Assemblies & Push-Pull Controls. Original Mfr Of Safety Cable, A Patented Fastener Reten... Read more

Contact supplier


Subscribe
Free REDWIRE e-newsletter
preformed wire-rope solutions

Preforming of wire rope offers a few distinct benefits.

Customers across the continent turn to Bergen Cable for the best in cable and wire rope – and have done so for close to eight decades. This company is renowned not just for its cable expertise, but also for alternatives like preformed wire-rope solutions. Preformed wire rope offers its own unique benefits. What distinguishes it from standard rope is that its strands and individual wires are preformed into a specific shape before manufacturers assemble them into the finished product.

No tendency to twist

Wire rope and cable are often referred to as if they were the same thing. But wire rope actually denotes ropes with diameters that exceed 3/8 of an inch, whereas ropes with smaller diameters are known as cords or cables. The preforming process on wire rope keeps wires and strands in their proper positions, eliminating their tendency to straighten.

The five key advantages of using preformed wire-rope solutions from Bergen:

  • The rope can be cut without the seizing that is needed to retain the structure of standard wire rope.
  • The broken rope ends do not untwist, unlike the ends of standard wire rope, and this increases the salvage value of broken ropes.
  • Preformed wire-rope solutions are substantially free from liveliness and twisting tendencies, which makes installation and handling simpler and also decreases the chances of damage to the rope from kinking or fouling. Preforming allows more general use of long lay and wire core constructions.
  • Removing internal stresses heightens resistance to fatigue from bending, thereby increasing service in applications in which ability to withstand bending is required. It also allows the use of ropes with larger outer wires when higher wear resistance is desired.
  • Outer wires wear thinner before they break, while broken wire ends do not protrude from rope to injure the user’s hands, nick and distort adjacent wires, or wear sheaves and drums. As broken ends do not porcupine, they are not as conspicuous as those of standard wire rope. Greater care is required during inspection of worn preformed rope to determine its true condition.

For more information, contact Bergen Cable.


Share

Posted by Bergen Cable Technology, Inc


Mfr Mechanical Cable, Cable Assemblies & Push-Pull Controls. Original Mfr Of Safety Cable, A Patented Fastener Reten... Read more

Contact supplier