At Sugatsune Canada, Inc., safety comes first, as is demonstrated with the innovative position and movement control and load bearing features of our bracket hardware for monitors, equipment, flaps, and shelving. This article underlines our key brackets:

FSL Series: Bracket for Monitor Mounting and Accessories

The FSL-V36 is an adjustable mount retrofitted on aluminum frame, which allows equipment to slide vertically while the lever is pushed and remain in a fixed position when released. A safety cover prevents unintentional downwards operation.

The FSL-MB is a monitor mounting bracket made of commercial quality cold rolled steel in enamel silver finish, which may be fixed onto the FSL-V36, for vertical travel, to mount monitors or other equipment. Its hole pitch is compliant with VESA standard (75 x 75 mm and 100 x 100 mm) for mounting.

Other parts for assembly are the FSL-L series of aluminum channels (a custom channel of 40 mm (1-9/16″) wide or over may also be used), end caps (FSL-EC) to prevent scratches from the exposed aluminum frame, and stoppers (FSL-S4) to limit monitor or equipment movement.

KA-T100S50: Monitor Bracket

The KA-T100S50 monitor bracket has been designed to fix onto the FSL-MB bracket or directly onto a vertical surface, with 180° swivel and 40° tilt functions using torque technology. There is a lock for the tilt and for the swivel features, with “ON” and “OFF” indications. This monitor mount holds a weight of up to 10 kg (22 lbs.) and has an auxiliary lock feature which will temporarily release when heavier loads are applied. The hardware consists of a mounting plate for the monitor and main body which fixes onto the surface or to the FSL-MB bracket, with a wiring hole to conveniently pass cables. Installation is easy with just one clip on motion to join the components. To disassemble, there is a release lever to push down at the bottom of the monitor mounting plate, which will tilt the monitor forward for easy removal.

388 Series: Aluminum Folding Bracket

The 388 series of aluminum folding brackets in anodized or black finish has a unique locking feature for flaps in the opened position. These brackets were designed for extended surface tops, which are foldable when not in use; to release: simply press the lever. They have a spectacular load capacity, ranging from 35 kg (77 lbs.) to 80 kg (176 lbs.) per individual use, and may also be installed in pairs.

SU and SV Series: Angle Bracket

The SU and SV series of angle brackets are made of 304 stainless steel and are ideal for environments needing anti-corrosive hardware, such as in applications for medical and marine industries. Included screws are also made of stainless steel. These angle brackets have a rounded design to prevent scratches from sharp corners. They range in size and have a load capacity of up to 24 kg (52 lbs.) to secure light furniture or equipment to walls and for shelf mounting.

BT Series: Bracket

The BT series of brackets houses a back plate, which was designed to reinforce and connect corners, leaving no gap compared to the conventional bracket. It is made of 304 stainless steel in satin finish and has an impressive load capacity of up to 82.5 mm (181 lbs.). The BTW (white finish) and BTK (black finish) series brackets made of steel are also available.

Innovative Design Solutions

Since 1930, Sugatsune Kogyo Co. (Japan) has been a trusted source worldwide for developing precision-engineered unique hardware solutions. In September of 2016, Sugatsune Canada, Inc. was established in Montreal, Quebec to provide a high level of service and local support to Canadian customers.

• Tweet